API CL-4 and FB-4: The 2027 Heavy-Duty Diesel Oil Standard Is Coming
The API CK-4 and FA-4 categories, which have served heavy-duty diesel engine oils for nearly a decade, are being succeeded by a new generation. The standard developed in the industry as PC-12 has entered API's official licensing document, API 1509, as two new categories: API CL-4 and API FB-4. Both can appear in the API Service Symbol starting January 1, 2027.
Why a New Standard?
According to API 1509, both categories are defined for high-speed four-stroke diesel engines designed to meet 2027 model year on-highway emission standards. New engines are built for tighter emission limits, more complex aftertreatment systems and lower viscosity oils. The oil has to keep up with these conditions.
According to industry press coverage, the new category has three main targets:
- Oxidation resistance: Oil that breaks down later at high temperature
- Wear protection: Longer life for engine components
- Seal compatibility: Compatibility with the seal and elastomer materials used in modern engines
API CL-4: Broad Use, Backward Compatible
Per the API 1509 definition, CL-4 oils are designed to meet or exceed the performance criteria of CK-4, CJ-4, CI-4 and CH-4. A CL-4 licensed oil can therefore be used in engines that call for the older categories and may display those categories on its label.
Other key points in the document:
- Fuel: Suitable for on-highway and non-road use with diesel fuel up to 500 ppm sulfur. With fuel above 15 ppm, consult the engine manufacturer for service intervals.
- Aftertreatment: Described as especially effective at sustaining the durability of particulate filters (DPF) and other advanced aftertreatment systems.
- Chemical limits: Sulfated ash max 0.9%, phosphorus max 0.08%, sulfur max 0.3%. The same document lists a sulfated ash limit of 1.0% for CK-4.
- Tests: Oxidation (Mack T-13), aeration (COAT), wear (Cummins ISB, ISM) and Detroit DD13 scuffing tests, plus compatibility tests against six seal materials.
API FB-4: Fuel Economy Focused, For Select Engines
FB-4 covers certain XW-30 and XW-20 oils. According to API 1509, their high temperature high shear (HTHS) viscosity is kept between 2.6 and 3.2 cP to help reduce greenhouse gas emissions.
The critical point: FB-4 oils are not interchangeable or backward compatible with CK-4, CJ-4, CI-4 and CH-4 oils. Whether FB-4 can be used in an engine must be decided based on the engine manufacturer's recommendation. FB-4 is also only recommended for fuel with a maximum of 15 ppm sulfur.
Practical Advice for Fleets
- Consider CL-4 for mixed fleets: Where old and new vehicles run side by side, backward compatible CL-4 simplifies stock with a single oil.
- Use FB-4 only with OEM approval: Low viscosity FB-4 should only be chosen for models the engine manufacturer approves.
- Account for fuel quality: FB-4 is not recommended where high sulfur fuel is used. With CL-4, set drain intervals together with the manufacturer.
- No need to rush: Industry experts note the new oils will not flood the market overnight. Continuing with the correct CK-4 oil in current engines is a safe path.
How to Read the API Symbol
The upper half of the API Service Symbol (the round "donut") on the pack shows the category. Per API 1509, CL-4 or FB-4 may appear there from January 1, 2027. FA-4 and FB-4 cannot appear in the symbol together with any C category. So if you see several categories such as "CL-4, CK-4", the oil is backward compatible. If it only says "FB-4", check your engine manual.
Contact the GMX Power team for help choosing the right heavy-duty oil for your fleet.
Sources
- API 1509 Engine Oil Licensing and Certification System, 24th Edition (July 2026, amended September 23, 2026): api.org
- API Engine Oil Licensing Program (EOLCS): api.org
- Heavy Duty Trucking, PC-12 overview (March 2026): truckinginfo.com
- US EPA, 2027 heavy-duty emissions rule: epa.gov

